PTL-UMB is a CE Certified Micrometer Grade Desktop Programmable Dip Coater (1-500 um/sec) with "touch-screen" digital control. Dipping rate, pulling rate, dwell time, and cycle life can be setup by touch screen controller and run dip coating automatically in the temperature controllable oven. It is designed for R&D Lab to
PTL-UMB is a Micrometer Grade Desktop Programmable Dip Coater (1-500 um/ sec) with “touch-screen” digital control. Dipping rate, pulling rate, dwell time, and cycle life can be setup by touch screen controller and run dip coating automatically in the temperature controllable oven. It is designed for R&D Lab to prepare
About 24% of these are testing equipment, 21% are metal coating machinery, and 15% are laboratory heating equipments. A wide variety of dip coater PTL- MM02 Millimeter Grade Programmable Dip Coater with Touch Screen Digital Controller. (1 PTL-UMB Micron Range Programmable Dip Coater (1-500 um/ sec).
The vertical moving system of the ND-DC Dip Coater allows the fabrication of diverse types of homogeneous films. The immersion and dipping-out speed rates range from a minimum of 10 microns per minute to a maximum speed of 150 millimeters per minute. This broad range of programmable dipping rates combined with
This page is for you Shenyang Kejing Auto-Instrument Co., LTD Dip Coaters selection of products, please consult the product calls for further information! Shenyang Kejing Auto-Instrument Co., LTD There are many types of products, different products will have subtle differences, the Company offers you comprehensive
Malaysia,Laboratory equipments distributor for SRI GC, Gas Chromatography, laboratory furnace, Lapping and polishing machine, glove box, dicing saw, reaction block,Auto Programmable syringe pump. PTL-NM01 Nanometer Grade Programmable Dip Coater with Touch Screen Digital Controller. (1 - 500 nm/sec).
The final solution of 100 ml volume was kept under programmed dip coating unit apparatus [Dip Coating Unit, Model No: HO-TH-02; Holmarc Opto-Mechatronics Pvt Ltd., Kochi, Kerela, India] for thin films deposition. The dip coating parameters were maintained for the CuAlS2 thin films depositions as: dipping speed – 9
24 Oct 2006 Next, a novel micron-scale dip-coating process and a GRAS coating formulation were designed to reliably produce uniform coatings on both individual . The coating solution was composed of 1% (w/v) carboxymethylcellulose sodium salt ( low viscosity, USP grade, CarboMer, San Diego, CA, USA), 0.5%
coating surface on different metal substrates via sol-gel dip coating method at room temperature. The prepared conducting polymers as advanced coating materials for corrosion protection of oxidizable metals has become one of the mechanically polished using zero grade polish paper as an abrasive. This practice